University of Malaysia Pahang UMP

University of Malaysia Pahang UMP

Courses
45
Scholarship
Yes

Bachelor of Engineering Technology (Manufacturing Systems) with Honours   APPLY

  Study Mode
FULL TIME
  Level
UNDER-GRADUATE
  Duration
4 years
  Intake
  Tution Fees
N/A

The program of Bachelor of Engineering Technology (Manufacturing) with Honours (BTM) was established in Universiti Malaysia Pahang (UMP) on 2012 in collaboration with the College of Engineering & Engineering Technology, at Northern Illinois University (NIU). This program was established for the preparation of Technical Engineers. Since that time, the Engineering Technology (Manufacturing) program, BTM has evolved into an industrial-oriented technology program serving many sectors of industry and companies in Malaysia. The objectives of the BTM program is to produce engineering technologists with mastery of the needed expertise in manufacturing industries using the foundation of technology and innovation, to prepare engineering technologiest that demonstrate skills of lifelong learning for professional and personal development, to prepare engineering technologist with good management skill, good professional ethics and understanding local law in manufacturing issues, and to prepare global engineering technologists that work and communicate effectively in multinational and multidisciplinary engineering community. The BTM program has received approval from the Ministry of Higher Education (MOHE) dated 9 March 2012 to begin offering the program for the 1st academic session 2012/2013 which begins in September 2012. The program also received a full accreditation from the Malaysian Qualification Agency (MQA) in 2016.

PROGRAM EDUCATIONAL OBJECTIVE

 PEO1 Graduates achieve advance standing professionally based on their technical expertise & accomplishment related to engineering practice and research, or in other fields they choose to pursue
 PEO2 Graduates continue to acquire knowledge in technical and non-technical areas in pursuit of life-long learning
PEO3 Graduates demonstrate commitment to the community and the professions, holding responsible positions that contribute to the benefits of the society

PROGRAM OUTCOMES

No MQF Program Learning Outcome
PO1 Engineering Knowledge Apply knowledge of mathematics, natural science, engineering fundamentals and an engineering specialisation to the solution of complex electrical and electronics engineering problems
PO2 Problem Analysis Identify, formulate, conduct research literature and analyse complex electrical and electronics engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences and engineering sciences.
PO3 Design of Solutions Design solutions for complex electrical and electronics engineering problems and design systems, components or processes that meet specified needs with appropriate consideration for public health and safety, cultural, societal, and environmental considerations
PO4 Investigation Conduct investigation of complex electronics engineering problems using research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of information to provide valid conclusions.
PO5 Modern Tool Usage Create, select and apply appropriate techniques, resources, and modern engineering and IT tools, including prediction and modelling, to complex engineering problems, with an understanding of the limitations.
PO6 Engineering & Society Apply reasoning informed by contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to professional engineering practice and solutions to complex engineering problems.
PO7 Environment & Sustainability Understand and evaluate the sustainability and impact of professional engineering work in the solutions of complex engineering problems in societal and environmental contexts.
PO8 Ethics Apply ethical principles and commit to professional ethics and responsibilities and norms of engineering practice.
PO9 Individual & Team Work Function effectively as an individual, and as a member or leader in diverse teams and in multi-disciplinary settings.
PO10 Communication Communicate effectively on complex engineering activities with the engineering community and with society at large, such as being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.
PO11 Project Management & Finance Demonstrate knowledge and understanding of engineering management principles and economic decision-making and apply these to one’s own work, as a member and leader in a team, to manage projects in multidisciplinary environments.
PO12 Life-long Learning Recognise the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

PROGRAMME STRUCTURE

YEAR 1

  • Technical Mathematics
  • Co-curriculum 1
  • Islamic and Asian Civilizations
  • Foreign Language 1
  • Fundamental of English Language*
  • Soft-skills 1
  • Computer Aided Drafting
  • Machine Production Process
  • Basic Manufacturing Processes
  • Calculus
  • Co-curriculum 2
  • Foreign Language 2
  • English For Academic Communication
  • Properties of Material
  • Statics
  • Ethnics Relation
  • Electrical Fundamental
  • Electrical Fundamental Laboratory

YEAR 2

  • Engineering Dynamics
  • Strength of Material
  • Applied Mathematic
  • Computer Aided Modelling
  • Thermofluids
  • English For Technical Communication
  • Metrology
  • Applied Statistics
  • Industrial Quality control
  • Engineering Economy
  • English for Professional Communication
  • Fluid Power Technology

YEAR 3

  • Manufacturing Computer Application
  • Technopreneurship
  • Soft-skills 2
  • Engineering Ethics
  • Programmable Logic Controllers
  • Metal Fabrication Processes
  • Lean Manufacturing System
  • Engineering Technology Senior Design Project I
  • Manufacturing Component Design
  • Production planning
  • Numerical Control Systems
  • Computer Integrated Manufacturing

YEAR 4

  • Automated Manufacturing System
  • Elective 1 - Safety and Ergonomics
  • Elective 2 - Advanced Manufacturing Process
  • Elective 3 - Work Measurement
  • Engineering Technology Senior Design Project II
  • Industrial Training

ENTRY REQUIREMENTS

  • STPM HOLDERS

Have Sijil Pelajaran Malaysia (SPM) / equivalent with credit in Bahasa Melayu / Bahasa Malaysia or credit in Malay / Bahasa Malaysia paper in July and pass the subjects of history began in 2013;

and

Pass the Sijil Tinggi Persekolahan Malaysia (STPM) Examination with a minimum CGPA of 2.00 and a minimum of:

  • Grade C (NGMP 2.00) General Studies subjects;

and

  • Grade C (NGMP 2.00) in two (2) other subjects.

and

Obtained at least Level 2 (Band 2) in the Malaysian University English Test (MUET).

AND

SPECIAL PROGRAM REQUIREMENTS

Obtained at least Grade C (2.00) at STPM level in the following subjects;

  • Mathematics T ; dan
  • Chemistry / Physics / Biology

and

Candidates who do NOT meet the requirements of Physics at STPM level must get at least credit in Physics at SPM level.

and

Candidates do NOT have physical / limb disabilities that make practical work difficult.

Note:

Candidates who do not take Physics at the STPM level are required to take Basic Physics subjects at the University.

  • MATRICULATION / FOUNDATION HOLDERS

Have Sijil Pelajaran Malaysia (SPM) / equivalent with credit in Bahasa Melayu / Bahasa Malaysia or credit in Malay / Bahasa Malaysia paper in July and pass the subjects of history began in 2013;

and

Passed KPM Matriculation / UM Science Foundation / UiTM Foundation with at least CGPA 2.00;

and

Obtained at least Level 2 (Band 2) in the Malaysian University English Test (MUET)

AND

SPECIAL PROGRAM REQUIREMENTS

Obtained at least Grade C (2.00) at the Matriculation / Foundation level in the following subjects;

  • Mathematics / Engineering Mathematics ; dan
  • Chemistry / Engineering Chemistry / Physics / Engineering Physics / Biology / Civil Engineering Studies / Mechanical Engineering Studies / Electrical & Electronic Engineering Studies / Basic Engineering

and

Candidates who do NOT meet the requirements of Physics at the Matriculation / Foundation level should get at least credit in Physics at SPM level.

and

Candidates do NOT have physical / limb disabilities that make practical work difficult.

Note:

Candidates who do not take Physics at the Matriculation / Foundation level are required to take Basic Physics subjects at the University.

  • DIPLOMA HOLDERS

 

Have Sijil Pelajaran Malaysia (SPM) / equivalent with credit in Bahasa Melayu / Bahasa Malaysia or credit in Malay / Bahasa Malaysia paper in July and pass the subjects of history;

and

Possess a Diploma or other qualification recognized as equivalent by the Government of Malaysia and approved by the University Senate;

and

Obtained at least Level 2 (Band 2) in the Malaysian University English Test (MUET).

AND

SPECIAL PROGRAM REQUIREMENTS

Possess a Diploma in a related field from a Public University (UA) / Private Institution of Higher Learning (IPTS) / Polytechnic with a minimum Gathering Average (CPA / CGPA) 2.00

and

Candidates do not have physical / limb competencies that make practical work difficult.

Note:

The year of admission and the actual period of study are subject to credit exemption approved by the Faculty.

  • IPTS FOUNDATION HOLDERS

Memliliki Sijil Pelajaran Malaysia (SPM) / equivalent with credit in Bahasa Melayu / Bahasa Malaysia or credit in Malay / Bahasa Malaysia paper in July and passed a course in history at least grade E;

and

Passed IPTS Foundation (UniKL / UNITEN / UTP / MMU) with at least CGPA 2.00;

and

Obtained at least Level 2 (Band 2) in the Malaysian University English Test (MUET).

AND

SPECIAL PROGRAM REQUIREMENTS

Obtained at least Grade C at the IPTS Foundation level (UniKL / UNITEN / UTP / MMU) in the following subjects:

  • Mathematics
  • Chemistry / Physics / Biology

and

Obtained at least Grade C at SPM level in the following subjects;

  • Additional Mathematics
  • Physics / Chemistry

Candidates who do not take Physics at the Basic level should get at least credit in Physics at SPM level.

and

Candidates do NOT have physical / limb disabilities that make practical work difficult.

Note:

Candidates who do not take Physics at the IPTS Foundation level (UniKL / UNITEN / UTP / MMU) are required to take Basic Physics subjects at the University.

  • CAREER PROSPECTS

Graduates of UMP are equipped with skills in Manufacturing Engineering Technology and softskills as an added value which allows them to build a career as: 

  • Manufacturing Technicians
  • Manufacturing Engineer
  • Process Engineer
  • Production Engineer
  • Process Technicians
  • Project Engineer
  • Tool Engineer
  • Industrial Engineer
  • Quality Engineer
  • Applications Engineer
  • Design Engineer
  • Project Manager
  • Production Control Technologists
  • Quality control engineering technicians
  • Production staff workers

Master in Process Plant Operation
APPLY

FULL TIME | September & February

Master of Industrial Engineering
APPLY

FULL TIME | September & February

Master of Science (Computer Networking)
APPLY

FULL TIME,BY COURSE WORK | September & February

Master of Business Administration (M.B.A) (By Coursework)
APPLY

FULL TIME,BY COURSE WORK | September & February

Master of Science (Software Engineering)
APPLY

FULL TIME,BY COURSE WORK | September & February

Master of Science in Technology-Integrated Language Studies
APPLY

FULL TIME,BY COURSE WORK | September & February

Master of Science (Industrial Mathematics) by Mixed-Mode
APPLY

FULL TIME,MIX MODE | September & February Every Year

Master of Science (Research)
APPLY

FULL TIME,PART TIME,BY RESEARCH WORK |

Doctor of Philosophy (PhD)
APPLY

FULL TIME,PART TIME,BY RESEARCH WORK |
whatsapp chat

Copyrights © 2020-21 Education Malaysia. All rights reserved.